Wheel & Tire Products, Dressings & Protectants
1. Either spray product directly on surface or spray on an applicator and wipe it on the surface.
2. Wipe off excess product with a towel on any adjoining surface.
3. Let product dry for a high gloss. If less gloss (matte finish) is desired, wipe with a towel when wet.
Depending on the profile (width of the sidewall) of the tire, instead of spraying Jax Wax Super Blue directly on the tire, saturate an applicator and wipe it on the tire. We recommend setting aside an applicator just to be used for Jax Wax Super Blue.
This will ensure a nice even coat and reduce the amount of over spray that needs to be cleaned off the rim. If you do get Jax Wax Super Blue - no worries - it will just help clean the wheel. Jax Wax Super Blue will wipe right off any wheel surface with no residue. Try to let the product dry before driving right off to reduce any "sling". If you do drive the vehicle before allowing it to dry and it does sling, simply wipe off with a quick detailer like Jax Wax Body Shine or Jax Wax Hawaiian Shine and wipe with a microfiber towel.
Dress all your trim as the last step after waxing. With the amount of plastic and vinyl trim on new cars these days, it is near impossible not to come in contact with it when applying wax - no matter how careful you are.
In addition to dressing the trim, Jax Wax Super Blue will safely remove any wax residue. When applying simply agitate the surface with your applicator. Then simply wipe off any residue from painted surface. Jax Wax Super Blue will not effect or any harm glass or painted surfaces.
Wheel Wells and Undercarriage
As a final step in detailing, spray Jax Wax Super Blue inside the wheel wells and any undercarriage in view. Jax Wax Super Blue will dry and hide any dirt or grime and make the wheel wells and undercarriage look clean and showroom fresh. Use as a last step when staging a car for show, or when you detail a vehicle.
Vinyl or Convertible Tops, Tonneau Covers or other Large Areas
.When applying Jax Wax Super Blue to a large area, apply with an applicator first "North and South" in even overlapping strokes. Then reapply "East and West". Going one way and then the other reduces any chances of seeing streaking and will ensure nice even coverage. When complete, wipe any excess off with a towel and let dry. This will prevent any of the product running off on your painted surface.
For Extremely Faded Trim or Vinyl
Use a couple of thin, even applications to restore and bring back the brilliance of faded vinyl trim.
For Interior Use
For "Matte", Flat Black. or "Rat Rod" Finishes
Removing fingerprints or streaks from the increasingly popular "matte" finishes or even "flat" finishes on newer cars can be a challenge. Quick spray detailers will not do the job. Simply apply Jax Wax Super Blue with an applicator directly on the surface as you would a vinyl top (above) and towel it dry. This will remove any fingerprints or streaks and leave a perfect finish!
The reason that we are confident that you will love Jax Wax Super Blue is simple - We ARE the Manufacturer. Even though more costly, we only use the highest quality ingredients and do not dilute our products to increase profits.
This is the same dressing for tires, rubber, plastic and vinyl that we sell to our commercial customers consisting of hundreds of car dealers, professional detailers, auto body shops and classic car owners every day. Jax Wax dressings are commercial products that are of higher quality than than most "retail" car care products that sit on the "wax wall" vying for your hard earned dollars with slick labels and packaging. Click here to read "Should You Use Professional Car Care Products?